Outback Imaging Pty Ltd.

Objective Barcode Demonstration Job Type,	8/05/2008

This job uses EzeScan PRO, EDRMS, BCR, KFI and Upload modules. (DM Bundle + BCR)
It will read the barccode value on the image, name the image the barcode
value and upload it to a objective folder.

COMPATIBILITY

EzeScan 4.2.3 (and above)


INSTALLATION INSTRUCTIONS

Login to the Objective Client (with your account) and create a folder called "Scanned Docs". Note the Folder ID.
If you wish to use a previously created folder note the Folder ID.


NOTE: If you are planning on scanning the image then open the Barcode_Separator.tif file (in EzeScan) and print it.
The file is in in the C:\Program Files\Outback Imaging\EzeScan 4.2\Samples folder.

When scanning always scan this job at 300 DPI.
If using a TWAIN scanner, press F6 and configure the Scan Tab settings for your scanner. 
If using a network scanner, press F6 and on the import tab change the input path to where
your device saves the images to. You could also select Enable Import Folder Processing so then there
will be no need to browse for the image. (Import folder will pickup images in the input folder automatically)


Load EzeScan

Select Admin, Settings Backup, Select Import
Click the ... button and browse to the Objective BCR.cfg file
Click the import button
When Completed, click the close button


Press F8. (or select Admin, Upload) Select "Objective - BCR" from the dropdown list. 


In the upload properties pane, Change the following to your server:

1) Server (you may need to confirm with your objective administrator)
2) User
3) Password
4) In the Grid on the right there is a target field called Document Type. This is currently set
   to "Document" If required change this to the Document Type that you will be uploading as.
5) In the Grid on the right there is a target field called Parent Folder. This is currently set
   to "fA22". Change this to the Folder ID created earlier.

Click Apply and then OK.


OPERATION INSTRUCTIONS 

1) Load the EzeScan Operator screen (F6) select "Objective - BCR" from the drop down list
   and then Press the Import File Button. Select the Barcode_separator.tif file.
   (Scan button if using TWAIN, Import Folder button if network scanner)
  
   You will notice the image appear on the screen and thumbnails on the left.
  
2) Press F4 (Profile)


EzeScan will now process the three images, it will read the barcode value, Convert to PDF,
apply the barcode value as the Name, and then save them to your objective folder that was
specified earlier.